31 / 37
4-28
U.S. 888-725-9355
Canada 800-387-3889
SLACK ADJUSTERS
GUNITE AUTOMATIC SLACK ADJUSTERS
HARDWARE
Euclid
Part No.
Clevis Type
Style
Push Rod
Thread
Comments
Application Information
E-15061
Threaded Straight
5/8"-18 Replaces AS3000
E-15062
Threaded Straight
1/2"-20 Replaces AS3001
E-15063
Threaded 5/8" Offset 1/2"-20 Replaces AS3002
E-15064
Threaded 5/8" Offset 5/8"-18 Replaces AS3003
E-15065
Threaded Straight
5/8"-18 Replaces AS3011 For application with 5/8" Clevis Pins
E-15066
Threaded Straight
1/2"-20 Replaces AS3012 For application with 5/8" Clevis Pins
E-15067
Extended
Threaded
Straight
5/8"-18 Replaces AS3013
E-15068
Extended
Threaded
Straight
5/8"-18 Replaces AS3015 Furnished with Stainless Steel Clevis Pins
E-15069
Collar Lock Straight
5/8"-18 Replaces AS3016
E-15070
Collar Lock Straight
1/2"-20 Replaces AS3017
E-15071
Extended
Collar Lock
Straight
5/8"-18 Replaces AS3018
E-15072
Collar Lock Straight
1/2"-20 &
5/8"-18
Replaces AS3019
Furnished with (1) 1/2" and (1) 5/8"
Collar Nuts
E-15073
Extended
Collar Lock
Straight
5/8"-18 Replaces AS3021 With Stainless Steel Clevis Pins
Above referenced kits contain a Clevis that has a 1.02" pin center distance. When installing or replacing a Gunite Automatic Slack Adjuster, it is recommended
that a new clevis assembly be installed in accordance with the Gunite Automatic Slack Adjuster Service Manual.
Hardware images are representative of parts in list below. Actual parts may vary.