296 / 348
TECHNICAL INFORMATION
MER
Customer Service: 800-562-5012 / Technical Support: 888-562-5012
294
TEC
10
Description & Mandatory Requirements
Color of Lights :
* Photometrically certified at installation angle
Width 2032mm (80 in.) or wider & GVWR 4536 kg (10,001 lb.) or more
Rear Upper
Body
Markings
DOT-C
DOT-C2
DOT-C3
DOT-C4
DOT-C
DOT-C2
DOT-C3
DOT-C4
DOT-C
DOT-C2
DOT-C3
DOT-C4
DOT-C
DOT-C2
DOT-C3
DOT-C4
Bumper
Bar
Markings
Rear Lower
Body
Marking
Side
Marking
Reflex reflectors
(#3) may not be
required if they are
replaced in their
required location
with conspicuity
treatment.
Optional in
Canada:
Rear lower body
and side
conspicuity also
be solid white,
solid yellow, or
white & yellow.
Exactly 2 pairs
of 300 mm
long strips
Continuous
Continuous
(see location)
On the rear upper
corners facing
rearward
On the rear bumper
bar’s horizontal
element full width of
the vehicle facing
rearward
On the rear full
width of the
vehicle facing
rearward
Each side-facing
sideward
continuous, or
evenly spaced
over minimum of
50% length starts
& ends as close to
the front & rear of
the vehicle as
practicable
At the top
No requirement
As horizontal &
as close as
practicable to the
range of 375mm
to 1525 mm from
the ground
As horizontal &
as close as
practicable to the
range of 375 mm
to 1525 mm from
the ground
Red
Yellow
Red/Yellow
White/Red White
Conspicuity
Treatment
Quantity
Location
DOC
Coding
Height
Options
July, 2015
4ab
1
12ab
Basic Equipment Required
On All Trucks, Buses,
1
2
3
Description & Mandatory Requirements
Descr
Daytime
Running
Lamps
Forward road
Illumination, US requires
‘DOT’ lettering on lens
US&Canada -light code
required on lens
Forward road
Illumination, US requires
‘DOT’ lettering on lens
US&Canada -light code
required on lens
Show vehicle’s width
Vehicles 2032mm wide
or wider
*Front
Clearance
Lamps
Front Side
Reflex
Reflectors
*Front Side
Marker
Lamps
*Rear Side
Marker
Lamps
Rear Side
Reflex
Reflectors
*Rear
Clearance
Lamps
(H, HR)
Min. 2
Front-symmetrical as far
apart as practicable
At widest
point-symmetrical on
the front or near the
front facing forward
On the front-center
horizontally space
150 mm (6 in.) to
300 mm (12 in.) apart
Each side at front as far
forward as practicable
Each side front as far
forward as practicable
facing sideways
Min. 2
Min. 2
Min. 2
Min. 2
Min. 2
Min. 2
(H, HR)
(P)
(Y2)
(P2, or P3)
(P2, PC* or
P3, PC2*)
(A)
(P2, PC* or
P3, PC2*)
Rear
Identification
Lamps
Trail Lamps
Front & rear side
marker lamps/side
reflex reflectors
indicate vehicle’s
presence & length
Front & rear side
marker lamps/side
reflex reflectors
indicate vehicle’s
presence & length
Indicat presence of
a wide vehicle
Vehicles 2032mm
wide or wider
(A)
(P2, PC* or
P3, PC2*)
(T)
Stop Lamps
(S)
Rear Turn
Sig./Hazard
Warning
Lamps
(I)
Rear Reflex
Reflectors
(A)
(P2 or P3)
Exactly 3
Front-symmetrical as far
apart as practicable
Front-symmetrical if 4
system-inboard or below
lower beams
Front-symmetrical as far
apart as practicable if 4
lamp system-outboard or
above upper beams
Headlamp-
Lower Beam
Headlamps-
Upper Beam
Parking
Lamps
560-1370mm
(22-54 in.)
560-1370mm
(22-54 in.)
380-1830mm
(15-72 in.)
As high as
practicable
or the top of
the cab
As high as
practicable
380mm (15 in.)
minimum
380-1530mm
(15-60 in.)
380mm (15 in.)
min. Max.
depends on
DRL type
Indicate in use vehicle
Canada- r quired/US
option
US requires lettering on
lens if not headlamps
Indicate park d
vehicle
vehicles less than
2032 mm wide
Front Turn
Sig./Hazard
Warning
lamps
Front-symmetrical as far
apart as practicable
Min. 2
(I)
380-2110mm
(15-83 in.)
Indicate direction of
turn/identify disabled
vehicle
Truck, Bus, MPV Equipment Loc tion •
All Trailers Over 80 Inches
a
b
Front
Identification
Lamps
4
a
b
5
6
7
8
Equipment
SAE Lens
Coding
Equ pment
Quantity
Location
SAE Lens
Coding
Function
Height From
Ground
(P2, PC* or
P3, PC2*)
Some interpretations may allow other i
Trailer Equipment Locations
|
All Trailers Over 80 Inches
ip t SAE Lens
oding
i t ro
r d
it
Location
Function
Description & Mandatory Requirements
TRUCK, BUS, MPV EQUIPMENT
LOCATION REQUIREMENTS