298 / 348
TECHNICAL INFORMATION
MER
Customer Service: 800-562-5012 / Technical Support: 888-562-5012
296
TEC
10
Description & Mandatory Requirements
Color of Lights :
* Photometrically certified at installation angle
Width 2032mm (80 in.) or wider & GVWR 4536 kg (10,001 lb.) or more
Rear Upper
Body
Markings
DOT-C
DOT-C2
DOT-C3
DOT-C4
DOT-C
DOT-C2
DOT-C3
DOT-C4
DOT-C
DOT-C2
DOT-C3
DOT-C4
DOT-C
DOT-C2
DOT-C3
DOT-C4
Bumper
Bar
Markings
Rear Lower
Body
Marking
Side
Marking
Reflex reflectors
(#3) may not be
required if they are
replaced in their
required location
with conspicuity
treatment.
Optional in
Canada:
Rear lower body
and side
conspicuity also
be solid white,
solid yellow, or
white & yellow.
Exactly 2 pairs
of 300 mm
long strips
Continuous
Continuous
(see location)
On the rear upper
corners facing
rearward
On the rear bumper
bar’s horizontal
element full width of
the vehicle facing
rearward
On the rear full
width of the
vehicle facing
rearward
Each side-facing
sideward
continuous, or
evenly spaced
over minimum of
50% length starts
& ends as close to
the front & rear of
the vehicle as
practicable
At the top
No requirement
As horizontal &
as close as
practicable to the
range of 375mm
to 1525 mm from
the ground
As horizontal &
as close as
practicable to the
range of 375 mm
to 1525 mm from
the ground
Red
Yellow
Red/Yellow
White/Red White
Conspicuity
Treatment
Quantity
Location
DOC
Coding
Height
Options
July, 2015
Trailer Equipment Locations
|
All Trailers Over 80 Inches
TRUCK, BUS, MPV EQUIPMENT
LOCATION REQUIREMENTS
Equipment
SAE Lens
Coding
Height From
Ground
Quantity
Location
Function
10
Description & Mandatory Requirements
Color of Lights :
* Photometrically certified at installation angle
Length 9.1 m (30 ft.) or longer & Truck Tractors
License
Plate
Lamp(s)
DOT-C
DOT-C2
DOT-C3
DOT-C4
DOT-C
DOT-C2
DOT-C3
DOT-C4
Rear Upper
Body
Markings
Rear
Marking
Intermediate
Side Reflex
Reflectors
Illuminates license
plate
Indicate presence of
a long vehicle
Rear-above or at the
sides of license plate
Each side near center
Each side near center
facing sideward
Rear upper corners of
cab facing rearward
Rear- facing rearward-
on fenders, on mud
flap brackets, or within
300 mm below the top
of mud flaps
Min. 1
Min. 2
Min. 2
Intermediate
Side Marker
Lamps
Indicate presence of
a long vehicle
(15 in.)
m
No requirement
30mm
in.)
top-may
er if
eader
er than
as
able may
r only if
s are at
10
12
13
14
t From
und
Equip ent
tity
Location
SAE Lens
Coding
Function
Height From
round
30mm
in.)
30mm
in.)
As high as practicable
excluding fairings
As horizontal as
practicable and
higher than 1525 mm
from the ground
30mm
in.)
30mm
in.)
a
b
(A)
(L)
Conspicuity
Treatment
Quantity
Location
DOC
Coding
Height
Options
(P2 or P3)
380mm (15 in.)
minimum
380-1530mm
(15-60 in.)
If mud flaps
not used- on
the cab or
frame
mounted
brackets
Exactly 2 pairs of
300 mm long
strips
Exactly 2
sections of min.
600 mm each
* Multi-purpose vehicle
Backup
Lamp
(R)
Illuminates ground
behind the vehicle
and alert road users
Min. 1
Rear
No requirement
9
formation.
July, 2015
White/Yellow
Red
Yellow
Red/Yellow
White/Red White
Description & Mandatory
uire ents
Length 9.1 m (30 ft.) or longer & Truck Tractor